Pitot Covers & Banners

Pitot Tube Cover
This pitot tube cover fits snugly over 5/8" pitot systems found on:

• Cessna 300 series, 400 series, Citation, and Conquest;
• Beech singles and twins;
• Piper Navajo, Cheyenne, most G1000 Mirage, Matrix, and Meridians;
• Mooneys;
• Mitsubishi;
• Lear jets; and
• Cirrus airplanes.

Critical to safe operations, the cover keeps dirt, contamination, and insects from entering the pitot tube. A "remove before flight" streamer hangs off the cover as a prominent preflight reminder to pilots. The cover uses a heavy-duty plastic material; the 2" x 17" banner is bright red with white screen-printing for maximum visibility.

Pitot Tube Cover (large)
This pitot tube cover fits snugly over 3/4" pitot systems, found on:

• Cessna 150, 152, 172, 177, 182, 200 Series,
• Skymaster, and
• the Falcon jet.

Critical to safe operations, the cover keeps dirt, contamination, and insects from entering the pitot tube. A "remove before flight" streamer hangs off the cover as a prominent preflight reminder to pilots.

The cover uses a heavy-duty plastic material; the 2" x 17" banner is bright red with white screen-printing for maximum visibility.

Pitot Tube Cover (blade)
This pitot tube cover fits snugly over blade-type pitot systems typically found on:

• Piper Cherokee,
• Warrior, and
• Arrow aircraft.

They are vented to prevent pressurization of the pitot-static system. Critical to safe operations, the cover keeps dirt, contamination, and insects from entering the pitot tube. A "remove before flight" streamer hangs off the cover as a prominent preflight reminder to pilots.

The cover uses a heavy-duty plastic material; the 2" x 17" banner is bright red with white screen-printing for maximum visibility.

Remove Before Flight Banner
High visibility red streamer that can be fastened to anything that needs removing before flight.

A bright red heavy nylon banner that can be fastened to anything that needs removing before flight. Comes with a grommet and wire ring that can be attached to everything from gear pins to gust locks and pitot covers. Heavy duty vinyl is tear resistant.